[{"Id":2297,"ModelId":85,"Question":"Which size bike should I purchase?","Answer":"

To ensure the best sizing, we recommend that you visit your local Pivot dealer to get a professional fit and refer to our geometry chart to check your measurements. However, we can provide a rough guideline. Keep in mind the Vault’s geometry was designed considering our spec of 60-70mm stems. This allows you to size down and run a longer stem if preferred to get a more traditional fit.<\/p>\r\n\r\n

XXS: 4'10" – 5'2" | 1,47 - 1,57 m
\r\nX-Small: 5'0" – 5'4" | 1,52- 1,63 m
\r\nSmall: 5'4" – 5'8" | 1,63 - 1,73 m
\r\nMedium: 5'8" – 6' | 1,73 - 1,83 m
\r\nLarge: 6' – 6'2" | 1,83 - 1,88 m
\r\nX-Large: 6'2" – 6'6" | 1,88 - 1,98 m<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2298,"ModelId":85,"Question":"How wide of a tire can I run on the Vault?","Answer":"

The Vault can accommodate tires up to 700x50c (1x) \/ 700x47c (2x) or 27.5” x 2.0.” If you choose to use something that is not our standard specification, We suggest you check the fit with your chosen rim and tire combination to make sure it has proper clearance before riding. Most tires up to our listed maximum size will fit, but rim width and tire manufacture sizing call outs and tire inconsistency can result in huge difference among both tire brands and individual tires.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2299,"ModelId":85,"Question":"What is the Tool Shed™?","Answer":"

The Tool Shed is Pivot’s internal storage and cable management system. This feature allows you to store all your ride essentials safely and cleanly inside the frame. It also features cable guides to keep your routing clean and quiet even on the roughest surfaces.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2300,"ModelId":85,"Question":"What is ISO FLEX?","Answer":"

ISO FLEX is a Pivot designed, patented system that isolates the seatpost from the frame for extraordinary comfort while maintaining elite level frame stiffness. The lightweight rubber insert allows the rider to use any seatpost on the market including dropper posts with class-leading comfort.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2301,"ModelId":85,"Question":"What size seatpost does the Vault use?","Answer":"

27.2mm<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2302,"ModelId":85,"Question":"What size seat clamp does the Vault use?","Answer":"

The Vault frame uses a proprietary seatpost clamp designed to work with the ISO FLEX system. Standard seat collars will not work.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2303,"ModelId":85,"Question":"Can I use a dropper post with this frame?","Answer":"

Yes, the Vault is designed for internal routing for a 27.2mm dropper, or any 27.2mm wireless dropper.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2304,"ModelId":85,"Question":"What is the seat tube insertion depth on the Vault?","Answer":"

XXS - 197mm
\r\nXS - 167mm
\r\nS - 212mm
\r\nM - 218mm
\r\nL - 244mm
\r\nXL - 264mm
\r\n*Please check seat post measurements carefully before installing the post.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2305,"ModelId":85,"Question":"Can I use a power meter on the Vault?","Answer":"

Yes, the Vault will accept all pedal and most crank-based power meters.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2306,"ModelId":85,"Question":"Is the Vault frame compatible with suspension forks? ","Answer":"

Yes, the Vault frame is compatible with the suspension gravel forks currently on the market such as the Fox 32 Tapercast 40mm travel or Rock Shox Rudy 30mm or 40mm travel options.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2307,"ModelId":85,"Question":"What is the fork offset on the Vault?","Answer":"

The fork offset on the Vault is 52mm.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2308,"ModelId":85,"Question":"What is the axel to crown on the Vault Fork?","Answer":"

The axle to crown measurement on the Vault Fork is 415mm.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2309,"ModelId":85,"Question":"What bottom bracket is used on the Vault and which cranks are compatible?","Answer":"

The Vault frame features the BB386EVO bottom bracket system (designed by our own Chris Cocalis). This maximum size BB greatly increases torsional rigidity and strength and improves power transfer for a more efficient ride while also providing for more tire clearance to clear the widest rims on the market.
\r\nAny 24mm spindle cranks from Shimano or SRAM are fully compatible with the proper 30mm BB conversion. The system is also compatible with Campy and of course 386EVO specific cranks from Rotor and FSA (BB30 specific cranks are not compatible with the 386EVO system).<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2310,"ModelId":85,"Question":"Are there any other bottom brackets that will work with the Vault? ","Answer":"

Yes, any press fit bottom bracket for a 386EVO (86.5mm width with a 46mm diameter) for your chosen crankset spindle.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2311,"ModelId":85,"Question":"What is the narrowest Q factor crank that the Vault will accept?","Answer":"

The Vault will accept standard road cranks from all major manufacturers where Q factor measurements are generally standardized.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2312,"ModelId":85,"Question":"What is the Vault’s Chainline?","Answer":"

This is very much based on drivetrain manufacturers' specifications and limitations. On the Vault, 43.5mm is the narrowest chainline you can run. This may be limited based on gearing size. Shimano 12 speed Dura Ace moves that out to 44.5mm. Shimano GRX 1X 12 speed crank is at 49.7mm chainline and the 2X Crank is at 47mm. Praxis Gravel cranks sit at 47mm for the 2X and 48mm for the 1X. SRAM Force Wide 1X crankset is at 47.5mm. Based on this, we are able to accommodate chainlines from 43.5mm to 49.7mm.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2313,"ModelId":85,"Question":"What rear axle does the Vault use?","Answer":"

The Vault uses an axle for 142mm rear spacing designed for the new Universal Derailleur Hanger (UDH) standard. The rear axle supplied with the frame is a Pivot specific design using a 12mm X 1.0mm thread pitch. SRAM also makes compatible 142mm UDH axles. Pivot UDH compatible axles can be found in our webstore.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2314,"ModelId":85,"Question":"What rear derailleur hanger does the Vault use?","Answer":"

The Vault uses the Universal Derailleur Hanger (UDH) standard developed by SRAM. This derailleur hanger is compatible with all derailleurs on the market – not just SRAM. We spec this hanger because it has some clever derailleur saving features and is more likely to be found at any shop and are also available in our webstore.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2315,"ModelId":85,"Question":"How do I set up the SRAM Eagle AXS Transmission on my Vault? ","Answer":"

The new SRAM AXS Transmission has a unique installation process that you must follow to set up this drivetrain on your bike properly. The complete installation instructions can be found at www.axs.sram.com
\r\nHere is the full mount information when setting up AXS Transmission on your Vault.
\r\nSetup Key: A
\r\nSetup Cog: 21t (7)
\r\nChainring Size 36t 38t 40t 42t 44t 46t
\r\nChain Length 116 116 118 118 120 120<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2316,"ModelId":85,"Question":"What hub\/wheel spacing does the Vault use?","Answer":"

The Vault features 12x142mm thru axle spacing in the rear and the front hub\/wheel spacing is 100mm with a 12mm thru axle.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2317,"ModelId":85,"Question":"What brakes does the Vault use?","Answer":"

The Vault is a disc brake only bike and can be used with any road specific hydraulic or mechanical disc brake on the market that is compatible with Shimano’s flat mount standard. There are options in the market to adapt post mount style calipers to work on the flat mount standard.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2318,"ModelId":85,"Question":"What size rotors will work on my Vault?","Answer":"

The Vault is designed to be used with 160mm rotors on the front and rear.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2319,"ModelId":85,"Question":"What front derailleur does the Vault use?","Answer":"

The Vault uses a braze-on style front derailleur. We only recommend using electronic front derailleurs. If you are using the Vault as a 1x, this mount is removable and your bike comes with a cover for this.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2320,"ModelId":85,"Question":"Can I use a chainguide on the Vault?","Answer":"

Yes, if you are using the Vault as a 1x, a braze-on mount top guide will work well for you.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2321,"ModelId":85,"Question":"What headset do I need for the Vault?","Answer":"

The upper headset bearing is a 36\/45 with a red seal and the lower is a 45\/45 with an orange seal. For details on routing through the headset, see the Token C-Box assembly information:<\/p>\r\nHeadsets - C BOX - TOKEN Cycling Products<\/a>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2322,"ModelId":85,"Question":"How much does it weigh?","Answer":"

The Vault frame weighs just 995g (2.19lbs) and complete builds from 8.25kg (18.2 lbs). Pivot bicycles are among the lightest available, but the weight is only one of many factors that make a great bicycle. Other aspects such as frame stiffness, strength, durability, and ride quality are just as important as weight to our engineers when designing our Hollow Core Carbon frames. Instead of comparing grams online, we suggest you visit your local Pivot dealer and see our attention to detail, smart, high value spec, and class leading features. Bring a scale if you’d like, but take just one demo ride and you’ll feel why Pivot Cycles are the most well-rounded, highest performing bicycles on the market and in many cases, yes, it’s the lightest as well.<\/p>","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2323,"ModelId":85,"Question":"Can I install fenders on the Vault?","Answer":"

Yes, The Vault has sleek hidden fender mounts for easy attaching fenders to the frame and fork.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"},{"Id":2324,"ModelId":85,"Question":"Can I mount a rack on the Vault?","Answer":"

We do not recommend mounting racks directly to the Vault frame or fork. The threaded inserts are only for mounting fenders and not designed for direct rack mounting. However, you can use a seat post mounted rack or any number of frame bags for on bike storage.<\/p>\r\n","IsActive":true,"Created":"2024-09-10T00:00:00","ModelVersion":"VLTV6"}]